Hydraulic Cartridge Check Valves

Two-port cartridge check valve symbol showing ports 1 and 2
Symbol
Two screw-in cartridge check valves
Cartridge Check Valve
Three-port cartridge check valve symbol showing ports 1, 2 and 3
Symbol 2
  • Upload File

Hydraulic cartridge check valve selection

A hydraulic cartridge check valve allows flow in one direction and closes against reverse flow, subject to the model’s leakage specification. Choose a conventional check for one-way flow, or review a pilot-operated cartridge when the circuit needs a controlled way to open the reverse path.

Compare conventional and pilot-operated check valves

ModelCircuit behaviorCavity
TCV-08-P check valveForward flow from port 1 to port 2 once the opening differential pressure is reached. Select the cracking pressure for the circuit.08-2
TPCV-10 pilot-operated check valveFree flow from port 2 to port 3. Sufficient pilot pressure at port 1 opens the reverse path from port 3 to port 2.10-3

Open each model page to review its hydraulic symbol and installation drawing.

Cartridge Check Valve Models

Browse 25 model pages. Open a group and scroll the cards to view specifications and drawings.

Standard cartridge models (12)
Pilot-operated models (1)
Pipe-mounted models (3)
Threaded insert models (9)
More selection information

Check the pressure and interface before ordering

Use the model’s symbol to confirm flow direction. Compare operating pressure, cracking-pressure options and leakage under their stated conditions. Check the cartridge valve cavity drawing and include the circuit and housing-port requirements when you request a valve review.

For pilot-controlled reverse flow, see the pilot-operated check valve guide. Check the available pilot pressure and the pressures at all connected ports for the selected circuit.

Frequently asked questions

What is cracking pressure?

It is the differential pressure at which forward flow begins to open the valve element. Use the model’s pressure-drop curve to evaluate the restriction at the required operating flow.

When do I need a pilot-operated check valve?

Evaluate one when the circuit needs to block reverse flow until pilot pressure releases that path. Check the pilot conditions and all connected port pressures. For an overrunning load, evaluate the circuit’s metering requirement separately.

Features

  • Compare each model’s forward and reverse flow paths.
  • Review cracking-pressure options and leakage under their stated test conditions.
  • Match the full cavity drawing and cartridge installation geometry.
  • Include available pilot pressure when requesting a pilot-operated model.
Selection inputInformation to provide
Model and flow pathRequired forward direction, reverse blocking and any pilot-controlled release.
Pressure and flowPressure at each port, required flow and cracking-pressure option.
InstallationExact cartridge model, cavity drawing, housing ports and drawing revision.
Fluid and temperatureFluid specification, operating temperature range and seal requirements.
Acceptance conditionsRequired leakage performance and any agreed inspection or testing conditions.

Related Products

  • Contact Saroit Support Team

    Upload File
Scroll to Top